>>> Building on armv7-1 under misc/freeopcua/opcua-client-gui BDEPENDS = [devel/py-installer;lang/python/3;devel/py-setuptools;devel/py-build;devel/py-wheel] DIST = [misc/freeopcua/opcua-client-gui:opcua-client-0.8.0.tar.gz] FULLPKGNAME = opcua-client-gui-0.8.0p7 RDEPENDS = [graphics/py-pyqtgraph;lang/python/3;misc/freeopcua/py-opcua;misc/freeopcua/py-opcua-widgets;x11/py-qt5] (Junk lock obtained for armv7-1 at 1775981237.24) >>> Running depends in misc/freeopcua/opcua-client-gui at 1775981237.34 last junk was in x11/gtksourceview3 /usr/sbin/pkg_add -aI -Drepair py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 was: /usr/sbin/pkg_add -aI -Drepair py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 /usr/sbin/pkg_add -aI -Drepair py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 Couldn't open /dev/null: Input/output error >>> Running show-prepare-results in misc/freeopcua/opcua-client-gui at 1775981237.63 Couldn't open /dev/null: Input/output error (Junk lock released for armv7-1 at 1775981239.01) >>> Running clean in misc/freeopcua/opcua-client-gui at 1775981239.16 Couldn't open /dev/null: Input/output error >>> Ended at 1775981239.29 max_stuck=0.00/depends=0.24/show-prepare-results=1.54/clean=0.28 Error: job failed with 256 on armv7-1 at 1775981239 >>> Building on localhost under misc/freeopcua/opcua-client-gui BDEPENDS = [devel/py-wheel;lang/python/3;devel/py-build;devel/py-installer;devel/py-setuptools] DIST = [misc/freeopcua/opcua-client-gui:opcua-client-0.8.0.tar.gz] FULLPKGNAME = opcua-client-gui-0.8.0p7 RDEPENDS = [x11/py-qt5;misc/freeopcua/py-opcua;graphics/py-pyqtgraph;lang/python/3;misc/freeopcua/py-opcua-widgets] (Junk lock obtained for localhost at 1776057932.50) >>> Running depends in misc/freeopcua/opcua-client-gui at 1776057932.61 /usr/sbin/pkg_add -aI -Drepair py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 was: /usr/sbin/pkg_add -aI -Drepair py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 /usr/sbin/pkg_add -aI -Drepair py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 >>> Running show-prepare-results in misc/freeopcua/opcua-client-gui at 1776057944.46 ===> misc/freeopcua/opcua-client-gui ===> Building from scratch opcua-client-gui-0.8.0p7 ===> opcua-client-gui-0.8.0p7 depends on: python->=3.13,<3.14 -> python-3.13.12 ===> opcua-client-gui-0.8.0p7 depends on: py3-build-* -> py3-build-1.4.0 ===> opcua-client-gui-0.8.0p7 depends on: py3-installer-* -> py3-installer-0.7.0p2 ===> opcua-client-gui-0.8.0p7 depends on: py3-setuptools->=79v0 -> py3-setuptools-80.9.0v0 ===> opcua-client-gui-0.8.0p7 depends on: py3-wheel-* -> py3-wheel-0.46.3p0 py3-build-1.4.0 py3-installer-0.7.0p2 py3-setuptools-80.9.0v0 py3-wheel-0.46.3p0 python-3.13.12 (Junk lock released for localhost at 1776057951.76) distfiles size=204910 >>> Running extract in misc/freeopcua/opcua-client-gui at 1776057951.87 ===> misc/freeopcua/opcua-client-gui ===> Checking files for opcua-client-gui-0.8.0p7 `/usr/ports/distfiles/opcua-client-0.8.0.tar.gz' is up to date. >> (SHA256) all files: OK ===> Extracting for opcua-client-gui-0.8.0p7 >>> Running build in misc/freeopcua/opcua-client-gui at 1776057958.96 ===> misc/freeopcua/opcua-client-gui ===> Patching for opcua-client-gui-0.8.0p7 ===> Compiler link: clang -> /usr/bin/clang ===> Compiler link: clang++ -> /usr/bin/clang++ ===> Compiler link: cc -> /usr/bin/cc ===> Compiler link: c++ -> /usr/bin/c++ ===> Generating configure for opcua-client-gui-0.8.0p7 ===> Configuring for opcua-client-gui-0.8.0p7 ===> Building for opcua-client-gui-0.8.0p7 * Getting build dependencies for wheel... running egg_info writing opcua_client.egg-info/PKG-INFO writing dependency_links to opcua_client.egg-info/dependency_links.txt writing entry points to opcua_client.egg-info/entry_points.txt writing requirements to opcua_client.egg-info/requires.txt writing top-level names to opcua_client.egg-info/top_level.txt reading manifest file 'opcua_client.egg-info/SOURCES.txt' writing manifest file 'opcua_client.egg-info/SOURCES.txt' * Building wheel... running bdist_wheel running build running build_py creating build/lib/uaclient copying uaclient/connection_ui.py -> build/lib/uaclient copying uaclient/__init__.py -> build/lib/uaclient copying uaclient/resources.py -> build/lib/uaclient copying uaclient/graphwidget.py -> build/lib/uaclient copying uaclient/connection_dialog.py -> build/lib/uaclient copying uaclient/mainwindow_ui.py -> build/lib/uaclient copying uaclient/mainwindow.py -> build/lib/uaclient copying uaclient/uaclient.py -> build/lib/uaclient installing to build/bdist.openbsd-7.9-armv7/wheel running install running install_lib creating build/bdist.openbsd-7.9-armv7/wheel creating build/bdist.openbsd-7.9-armv7/wheel/uaclient copying build/lib/uaclient/connection_ui.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/__init__.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/resources.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/graphwidget.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/connection_dialog.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/mainwindow_ui.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/mainwindow.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient copying build/lib/uaclient/uaclient.py -> build/bdist.openbsd-7.9-armv7/wheel/./uaclient running install_egg_info running egg_info writing opcua_client.egg-info/PKG-INFO writing dependency_links to opcua_client.egg-info/dependency_links.txt writing entry points to opcua_client.egg-info/entry_points.txt writing requirements to opcua_client.egg-info/requires.txt writing top-level names to opcua_client.egg-info/top_level.txt reading manifest file 'opcua_client.egg-info/SOURCES.txt' writing manifest file 'opcua_client.egg-info/SOURCES.txt' Copying opcua_client.egg-info to build/bdist.openbsd-7.9-armv7/wheel/./opcua_client-0.8.0-py3.13.egg-info running install_scripts creating build/bdist.openbsd-7.9-armv7/wheel/opcua_client-0.8.0.dist-info/WHEEL creating '/usr/obj/ports/opcua-client-gui-0.8.0/opcua-client-0.8.0/dist/.tmp-wb87lx0c/opcua_client-0.8.0-py3-none-any.whl' and adding 'build/bdist.openbsd-7.9-armv7/wheel' to it adding 'uaclient/__init__.py' adding 'uaclient/connection_dialog.py' adding 'uaclient/connection_ui.py' adding 'uaclient/graphwidget.py' adding 'uaclient/mainwindow.py' adding 'uaclient/mainwindow_ui.py' adding 'uaclient/resources.py' adding 'uaclient/uaclient.py' adding 'opcua_client-0.8.0.dist-info/METADATA' adding 'opcua_client-0.8.0.dist-info/WHEEL' adding 'opcua_client-0.8.0.dist-info/entry_points.txt' adding 'opcua_client-0.8.0.dist-info/top_level.txt' adding 'opcua_client-0.8.0.dist-info/RECORD' removing build/bdist.openbsd-7.9-armv7/wheel Successfully built opcua_client-0.8.0-py3-none-any.whl >>> Running package in misc/freeopcua/opcua-client-gui at 1776057977.33 ===> misc/freeopcua/opcua-client-gui ===> Faking installation for opcua-client-gui-0.8.0p7 ===> Building package for opcua-client-gui-0.8.0p7 Create /usr/ports/packages/arm/all/opcua-client-gui-0.8.0p7.tgz Creating package opcua-client-gui-0.8.0p7 reading plist| checking dependencies|graphics/py-pyqtgraphlang/python/3,-mainmisc/freeopcua/py-opcua-widgetsmisc/freeopcua/py-opcuax11/py-qt5 checksumming| | 0%* | 2%** | 4%* | 7%* | 9%** | 11%* | 13%* | 16%** | 18%* | 20%** | 22%* | 24%* | 27%** | 29%* | 31%* | 33%** | 36%* | 38%* | 40%** | 42%* | 44%* | 47%** | 49%* | 51%** | 53%* | 56%* | 58%** | 60%* | 62%* | 64%** | 67%* | 69%* | 71%** | 73%* | 76%* | 78%** | 80%* | 82%** | 84%* | 87%* | 89%** | 91%* | 93%* | 96%** | 98%*|100%  archiving| | 0% | 1%* | 1% | 2%* | 3%** | 6%* | 8%** | 10%* | 13%********* | 26%******** | 40%* | 40% | 41%* | 42%* | 43%* | 45%***********************************|100% /usr/ports/plist/arm/opcua-client-gui-0.8.0p7 was updated @depend lang/python/3,-main:python->=3.13,<3.14:python-3.13.11p0 -> @depend lang/python/3,-main:python->=3.13,<3.14:python-3.13.12 @depend x11/py-qt5:py3-qt5-*:py3-qt5-5.15.11p3 -> @depend x11/py-qt5:py3-qt5-*:py3-qt5-5.15.11p4 Link to /usr/ports/packages/arm/ftp/opcua-client-gui-0.8.0p7.tgz >>> Running clean in misc/freeopcua/opcua-client-gui at 1776058058.74 ===> misc/freeopcua/opcua-client-gui ===> Cleaning for opcua-client-gui-0.8.0p7 >>> Ended at 1776058059.39 max_stuck=46.86/depends=11.87/show-prepare-results=7.38/extract=7.10/build=18.37/package=81.39/clean=0.76 >>> Building on armv7-2 under misc/freeopcua/opcua-client-gui FULLPKGNAME = stub_name >>> Running build in misc/freeopcua/opcua-client-gui at 1777031027.27 ===> misc/freeopcua/opcua-client-gui ===> Building from scratch opcua-client-gui-0.8.0p7 ===> opcua-client-gui-0.8.0p7 depends on: python->=3.13,<3.14 - not found Dependency check failed *** Error 1 in misc/freeopcua/opcua-client-gui (/usr/ports/infrastructure/mk/bsd.port.mk:2386 '/usr/obj/ports/opcua-client-gui-0.8.0/.dep-lang-python-3') *** Error 2 in misc/freeopcua/opcua-client-gui (/usr/ports/infrastructure/mk/bsd.port.mk:2706 'build': @lock=opcua-client-gui-0.8.0p7; expo...) ===> Exiting misc/freeopcua/opcua-client-gui with an error *** Error 1 in /usr/ports (infrastructure/mk/bsd.port.subdir.mk:144 'build': @: ${echo_msg:=echo}; : ${target:=build}; for i in ; do eval...) >>> Running clean in misc/freeopcua/opcua-client-gui at 1777031029.39 ===> misc/freeopcua/opcua-client-gui ===> Cleaning for opcua-client-gui-0.8.0p7 >>> Ended at 1777031030.02 max_stuck=0.00/build=2.36/clean=0.72 Error: job failed with 512 on armv7-2 at 1777031030