>>> Building on armv7-2 under x11/gnustep/base
	BDEPENDS = [net/curl;textproc/libxslt;devel/gmp;devel/libffi;converters/libiconv;devel/gmake;x11/gnustep/libobjc2;net/avahi,-libs;textproc/icu4c;security/gnutls;x11/gnustep/make]
	DIST = [x11/gnustep/base:gnustep/gnustep-base-1.31.1.tar.gz]
	FULLPKGNAME = gnustep-base-1.31.1p1
	RDEPENDS = [textproc/libxslt;net/curl;converters/libiconv;devel/libffi;devel/gmp;x11/gnustep/libobjc2;net/avahi,-libs;x11/gnustep/make;security/gnutls;textproc/icu4c]
(Junk lock obtained for armv7-2 at 1775062770.01)
>>> Running depends in x11/gnustep/base at 1775062770.12
   last junk was in sysutils/jefferson
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
was: /usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
The following new rcscripts were installed: /etc/rc.d/messagebus
See rcctl(8) for details.
New and changed readme(s):
	/usr/local/share/doc/pkg-readmes/dbus
>>> Running show-prepare-results in x11/gnustep/base at 1775062789.19
===> x11/gnustep/base
===> Building from scratch gnustep-base-1.31.1p1
===> gnustep-base-1.31.1p1 depends on: gnustep-make-* -> gnustep-make-2.9.3p0
===> gnustep-base-1.31.1p1 depends on: gmake-* -> gmake-4.4.1p0
===> gnustep-base-1.31.1p1 depends on: libiconv-* -> libiconv-1.17
===> gnustep-base-1.31.1p1 depends on: libffi-* -> libffi-3.5.2
===> gnustep-base-1.31.1p1 depends on: gmp-* -> gmp-6.3.0p0
===> gnustep-base-1.31.1p1 depends on: libxslt-* -> libxslt-1.1.45
===> gnustep-base-1.31.1p1 depends on: gnutls-* -> gnutls-3.8.12p0
===> gnustep-base-1.31.1p1 depends on: icu4c-* -> icu4c-78.3v0
===> gnustep-base-1.31.1p1 depends on: avahi-libs-* -> avahi-libs-0.9rc3
===> gnustep-base-1.31.1p1 depends on: curl-* -> curl-8.19.0
===> gnustep-base-1.31.1p1 depends on: gnustep-libobjc2-* -> gnustep-libobjc2-2.3p0
===>  Verifying specs:  avahi-client avahi-common c ffi gmp gnutls iberty iconv icudata curl icui18n icuuc m objc2 pthread xml2 xslt z zstd c++ c++abi pthread BlocksRuntime dispatch iberty 
===>  found avahi-client.0.3 avahi-common.0.3 c.103.0 ffi.2.4 gmp.11.1 gnutls.47.13 iberty.13.0 iconv.7.1 icudata.23.0 curl.26.34 icui18n.23.0 icuuc.23.0 m.10.1 objc2.4.0 pthread.28.1 xml2.22.1 xslt.4.2 z.7.2 zstd.7.0 c++.12.0 c++abi.9.0 BlocksRuntime.0.0 dispatch.0.0
avahi-libs-0.9rc3
curl-8.19.0
gmake-4.4.1p0
gmp-6.3.0p0
gnustep-libobjc2-2.3p0
gnustep-make-2.9.3p0
gnutls-3.8.12p0
icu4c-78.3v0
libffi-3.5.2
libiconv-1.17
libxslt-1.1.45
Still tainted: no
>>> Running junk in x11/gnustep/base at 1775062799.30
/usr/sbin/pkg_delete -aIXq avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
--- -tcl-8.5.19p6 -------------------
You may wish to remove /usr/local/lib/tcl/tcl8.5/man from man.conf
(Junk lock released for armv7-2 at 1775062844.53)
distfiles size=3831129
>>> Running patch in x11/gnustep/base at 1775062844.62
===> x11/gnustep/base
===>  Checking files for gnustep-base-1.31.1p1
`/usr/ports/distfiles/gnustep/gnustep-base-1.31.1.tar.gz' is up to date.
>> (SHA256) all files: OK
===>  Extracting for gnustep-base-1.31.1p1
===>  Patching for gnustep-base-1.31.1p1
===>   Applying OpenBSD patch patch-Tools_Makefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- Tools/Makefile.postamble.orig	Thu Jun  9 19:14:46 2011
|+++ Tools/Makefile.postamble	Thu Jul  7 19:32:01 2011
--------------------------
Patching file Tools/Makefile.postamble using Plan A...
Hunk #1 succeeded at 50.
Hunk #2 succeeded at 57.
done
===>   Applying OpenBSD patch patch-Tools_make_strings_GNUmakefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Do not install gzipped manual page
|
|--- Tools/make_strings/GNUmakefile.postamble.orig	Mon Mar 16 12:44:23 2015
|+++ Tools/make_strings/GNUmakefile.postamble	Mon Mar 16 12:44:31 2015
--------------------------
Patching file Tools/make_strings/GNUmakefile.postamble using Plan A...
Hunk #1 succeeded at 44.
done
===>  Compiler link: clang -> /usr/bin/clang
===>  Compiler link: clang++ -> /usr/bin/clang++
===>  Compiler link: cc -> /usr/bin/cc
===>  Compiler link: c++ -> /usr/bin/c++
>>> Running configure in x11/gnustep/base at 1775062857.93
===> x11/gnustep/base
===>  Generating configure for gnustep-base-1.31.1p1
===>  Configuring for gnustep-base-1.31.1p1
Using /usr/obj/ports/gnustep-base-1.31.1/config.site (generated)
configure: WARNING: unrecognized options: --disable-debug, --enable-strip, --disable-silent-rules, --disable-gtk-doc
configure: loading site script /usr/obj/ports/gnustep-base-1.31.1/config.site
checking build system type... arm-unknown-openbsd7.9
checking host system type... arm-unknown-openbsd7.9
checking target system type... arm-unknown-openbsd7.9
checking for GNUstep configuration file to use at runtime... /etc/GNUstep.conf
checking whether the GNUstep.conf file path can be set in the environment... yes
checking if we should import an existing configuration file now... yes
checking for default GNUstep configuration file to use... /etc/GNUstep.conf
trying to import "/etc/GNUstep.conf"
configure: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option
checking for GNUstep-base installation domain... LOCAL
checking if we are hardcoding any relative paths in gnustep-base... no
configure: We store the following filesystem layout into gnustep-base, to be used when no config file is found
checking for Makefiles directory... /usr/local/share/GNUstep/Makefiles
checking for user defaults directory... GNUstep/Defaults
checking for user config file... .GNUstep.conf
checking for System Applications directory... /usr/local/libexec/GNUstep
checking for System Admin Applications directory... /usr/local/libexec/GNUstep
checking for System Web Applications directory... /usr/local/libexec/GNUstep
checking for System Tools directory... /usr/local/bin
checking for System Admin Tools directory... /usr/local/sbin
checking for System Library directory... /usr/local/lib/GNUstep
checking for System Libraries directory... /usr/local/lib
checking for System Headers directory... /usr/local/include
checking for System Documentation directory... /usr/local/share/doc/GNUstep
checking for System Info Documentation directory... /usr/local/info
checking for System Man Documentation directory... /usr/local/man
checking for Network Applications directory... /usr/local/libexec/GNUstep
checking for Network Admin Applications directory... /usr/local/libexec/GNUstep
checking for Network Web Applications directory... /usr/local/libexec/GNUstep
checking for Network Tools directory... /usr/local/bin
checking for Network Admin Tools directory... /usr/local/sbin
checking for Network Library directory... /usr/local/lib/GNUstep
checking for Network Libraries directory... /usr/local/lib
checking for Network Headers directory... /usr/local/include
checking for Network Documentation directory... /usr/local/share/doc/GNUstep
checking for Network Info Documentation directory... /usr/local/info
checking for Network Man Documentation directory... /usr/local/man
checking for Local Applications directory... /usr/local/libexec/GNUstep
checking for Local Admin Applications directory... /usr/local/libexec/GNUstep
checking for Local Web Applications directory... /usr/local/libexec/GNUstep
checking for Local Tools directory... /usr/local/bin
checking for Local Admin Tools directory... /usr/local/sbin
checking for Local Library directory... /usr/local/lib/GNUstep
checking for Local Libraries directory... /usr/local/lib
checking for Local Headers directory... /usr/local/include
checking for Local Documentation directory... /usr/local/share/doc/GNUstep
checking for Local Info Documentation directory... /usr/local/info
checking for Local Man Documentation directory... /usr/local/man
checking for User Applications directory... GNUstep/Applications
checking for User Admin Applications directory... GNUstep/Applications/Admin
checking for User Web Applications directory... GNUstep/WebApplications
checking for User Tools directory... GNUstep/Tools
checking for User Admin Tools directory... GNUstep/Tools/Admin
checking for User Library directory... GNUstep/Library
checking for User Libraries directory... GNUstep/Library/Libraries
checking for User Headers directory... GNUstep/Library/Headers
checking for User Documentation directory... GNUstep/Library/Documentation
checking for User Info Documentation directory... GNUstep/Library/Documentation/info
checking for User Man Documentation directory... GNUstep/Library/Documentation/man
checking for System User directory... /home
checking for Network User directory... /home
checking for Local User directory... /home
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... (cached) o
checking whether the compiler supports GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for cc option to enable C11 features... none needed
checking how to run the C preprocessor... clang -E
checking for stdio.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for wchar.h... (cached) yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking whether the compiler is clang... yes
checking for _LARGEFILE_SOURCE value needed for large files... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for off_t... (cached) yes
checking whether the compiler supports atomic operations... yes
checking for whoami... /usr/bin/whoami
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking the Objective-C runtime... Next Gen
checking for custom shared objc library... NONE
checking for objc/runtime.h... yes
checking for objc/objc.h... yes
configure: for gdomap network details
checking for variable length socket addresses... found
checking for compiler visibility attribute support... found
checking whether SO_REUSEADDR is broken... no
checking for objc threading flags...   
checking whether byte ordering is bigendian... no
checking size of void*... 4
checking size of short... (cached) 2
checking size of int... 4
checking size of long... 4
checking size of long long... (cached) 8
checking size of float... 4
checking size of double... 8
checking for working INTPTR_MAX, INTPTR_MIN, UINTPTR_MAX... yes
checking alignment of objc_object... 4
checking loading of constructor functions... yes
checking for windows.h... no
checking for dlfcn.h... (cached) yes
checking for dynamic linker type... simple
checking for dladdr in -ldl... no
checking for dladdr... yes
checking for gethostbyname... (cached) yes
checking for getaddrinfo... (cached) yes
checking for pthread.h... (cached) yes
checking for pthread_np.h... yes
checking size of pthread_mutex_t... 4
checking for pthread_mutex_t.__data.__owner... no
checking size of pthread_cond_t... 4
checking alignment of pthread_mutex_t... 4
checking alignment of pthread_cond_t... 4
checking for pthread_join in -lpthread... yes
checking for pthread_getthreadid_np... no
checking for pthread_main_np... yes
checking for sched_yield in -lrt... no
checking for pthread_setname_np()... none
checking for pthread_getname_np()... 
checking for pthread_spin_lock... yes
checking for nanosleep... (cached) yes
checking for usleep... (cached) yes
checking for Sleep... no
checking for objc_root_class attribute support... found
checking for gettid()... no
checking whether objc really works... no
I don't seem to be able to use your Objective-C compiler to produce
working binaries!  Please check your Objective-C compiler installation.
If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
can be found by the dynamic linker - usually that requires you to play
with LD_LIBRARY_PATH or /etc/ld.so.conf.
Please refer to your compiler installation instructions for more help.
configure: error: The Objective-C compiler does not work or is not installed properly.
*** Error 1 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3024 'do-configure': @for d in /usr/obj/ports/gnustep-base-1.31.1/...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3044 '/usr/obj/ports/gnustep-base-1.31.1/.configure_done': @cd /us...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:2706 'configure': @lock=gnustep-base-1.31.1p1;  export _LOCKS_HELD...)
===> Exiting x11/gnustep/base with an error
*** Error 1 in /usr/ports (infrastructure/mk/bsd.port.subdir.mk:144 'configure': @: ${echo_msg:=echo};  : ${target:=configure};  for i in ; ...)
>>> Running clean in x11/gnustep/base at 1775062904.68
===> x11/gnustep/base
===>  Cleaning for gnustep-base-1.31.1p1
>>> Ended at 1775062905.54
max_stuck=31.39/depends=19.09/show-prepare-results=10.07/junk=45.31/patch=13.28/configure=46.78/clean=0.93
Error: job failed with 512 on armv7-2 at 1775062905
>>> Building on armv7-2 under x11/gnustep/base
	BDEPENDS = [net/curl;textproc/icu4c;converters/libiconv;net/avahi,-libs;security/gnutls;devel/libffi;x11/gnustep/make;textproc/libxslt;devel/gmp;x11/gnustep/libobjc2;devel/gmake]
	DIST = [x11/gnustep/base:gnustep/gnustep-base-1.31.1.tar.gz]
	FULLPKGNAME = gnustep-base-1.31.1p1
	RDEPENDS = [x11/gnustep/libobjc2;devel/gmp;textproc/libxslt;devel/libffi;x11/gnustep/make;security/gnutls;net/avahi,-libs;converters/libiconv;textproc/icu4c;net/curl]
(Junk lock obtained for armv7-2 at 1775701426.36)
>>> Running depends in x11/gnustep/base at 1775701426.49
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
was: /usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
>>> Running show-prepare-results in x11/gnustep/base at 1775701461.24
===> x11/gnustep/base
===> Building from scratch gnustep-base-1.31.1p1
===> gnustep-base-1.31.1p1 depends on: gnustep-make-* -> gnustep-make-2.9.3p0
===> gnustep-base-1.31.1p1 depends on: gmake-* -> gmake-4.4.1p0
===> gnustep-base-1.31.1p1 depends on: libiconv-* -> libiconv-1.17
===> gnustep-base-1.31.1p1 depends on: libffi-* -> libffi-3.5.2
===> gnustep-base-1.31.1p1 depends on: gmp-* -> gmp-6.3.0p0
===> gnustep-base-1.31.1p1 depends on: libxslt-* -> libxslt-1.1.45
===> gnustep-base-1.31.1p1 depends on: gnutls-* -> gnutls-3.8.12p0
===> gnustep-base-1.31.1p1 depends on: icu4c-* -> icu4c-78.3v0
===> gnustep-base-1.31.1p1 depends on: avahi-libs-* -> avahi-libs-0.9rc3
===> gnustep-base-1.31.1p1 depends on: curl-* -> curl-8.19.0
===> gnustep-base-1.31.1p1 depends on: gnustep-libobjc2-* -> gnustep-libobjc2-2.3p0
===>  Verifying specs:  avahi-client avahi-common c ffi gmp gnutls iberty iconv icudata curl icui18n icuuc m objc2 pthread xml2 xslt z zstd c++ c++abi pthread BlocksRuntime dispatch iberty 
===>  found avahi-client.0.3 avahi-common.0.3 c.103.0 ffi.2.4 gmp.11.1 gnutls.47.13 iberty.13.0 iconv.7.1 icudata.23.0 curl.26.34 icui18n.23.0 icuuc.23.0 m.10.1 objc2.4.0 pthread.28.1 xml2.22.1 xslt.4.2 z.7.2 zstd.7.0 c++.12.0 c++abi.9.0 BlocksRuntime.0.0 dispatch.0.0
avahi-libs-0.9rc3
curl-8.19.0
gmake-4.4.1p0
gmp-6.3.0p0
gnustep-libobjc2-2.3p0
gnustep-make-2.9.3p0
gnutls-3.8.12p0
icu4c-78.3v0
libffi-3.5.2
libiconv-1.17
libxslt-1.1.45
(Junk lock released for armv7-2 at 1775701471.31)
distfiles size=3831129
>>> Running patch in x11/gnustep/base at 1775701471.40
===> x11/gnustep/base
===>  Checking files for gnustep-base-1.31.1p1
`/usr/ports/distfiles/gnustep/gnustep-base-1.31.1.tar.gz' is up to date.
>> (SHA256) all files: OK
===>  Extracting for gnustep-base-1.31.1p1
===>  Patching for gnustep-base-1.31.1p1
===>   Applying OpenBSD patch patch-Tools_Makefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- Tools/Makefile.postamble.orig	Thu Jun  9 19:14:46 2011
|+++ Tools/Makefile.postamble	Thu Jul  7 19:32:01 2011
--------------------------
Patching file Tools/Makefile.postamble using Plan A...
Hunk #1 succeeded at 50.
Hunk #2 succeeded at 57.
done
===>   Applying OpenBSD patch patch-Tools_make_strings_GNUmakefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Do not install gzipped manual page
|
|--- Tools/make_strings/GNUmakefile.postamble.orig	Mon Mar 16 12:44:23 2015
|+++ Tools/make_strings/GNUmakefile.postamble	Mon Mar 16 12:44:31 2015
--------------------------
Patching file Tools/make_strings/GNUmakefile.postamble using Plan A...
Hunk #1 succeeded at 44.
done
===>  Compiler link: clang -> /usr/bin/clang
===>  Compiler link: clang++ -> /usr/bin/clang++
===>  Compiler link: cc -> /usr/bin/cc
===>  Compiler link: c++ -> /usr/bin/c++
>>> Running configure in x11/gnustep/base at 1775701496.67
===> x11/gnustep/base
===>  Generating configure for gnustep-base-1.31.1p1
===>  Configuring for gnustep-base-1.31.1p1
Using /usr/obj/ports/gnustep-base-1.31.1/config.site (generated)
configure: WARNING: unrecognized options: --disable-debug, --enable-strip, --disable-silent-rules, --disable-gtk-doc
configure: loading site script /usr/obj/ports/gnustep-base-1.31.1/config.site
checking build system type... arm-unknown-openbsd7.9
checking host system type... arm-unknown-openbsd7.9
checking target system type... arm-unknown-openbsd7.9
checking for GNUstep configuration file to use at runtime... /etc/GNUstep.conf
checking whether the GNUstep.conf file path can be set in the environment... yes
checking if we should import an existing configuration file now... yes
checking for default GNUstep configuration file to use... /etc/GNUstep.conf
trying to import "/etc/GNUstep.conf"
configure: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option
checking for GNUstep-base installation domain... LOCAL
checking if we are hardcoding any relative paths in gnustep-base... no
configure: We store the following filesystem layout into gnustep-base, to be used when no config file is found
checking for Makefiles directory... /usr/local/share/GNUstep/Makefiles
checking for user defaults directory... GNUstep/Defaults
checking for user config file... .GNUstep.conf
checking for System Applications directory... /usr/local/libexec/GNUstep
checking for System Admin Applications directory... /usr/local/libexec/GNUstep
checking for System Web Applications directory... /usr/local/libexec/GNUstep
checking for System Tools directory... /usr/local/bin
checking for System Admin Tools directory... /usr/local/sbin
checking for System Library directory... /usr/local/lib/GNUstep
checking for System Libraries directory... /usr/local/lib
checking for System Headers directory... /usr/local/include
checking for System Documentation directory... /usr/local/share/doc/GNUstep
checking for System Info Documentation directory... /usr/local/info
checking for System Man Documentation directory... /usr/local/man
checking for Network Applications directory... /usr/local/libexec/GNUstep
checking for Network Admin Applications directory... /usr/local/libexec/GNUstep
checking for Network Web Applications directory... /usr/local/libexec/GNUstep
checking for Network Tools directory... /usr/local/bin
checking for Network Admin Tools directory... /usr/local/sbin
checking for Network Library directory... /usr/local/lib/GNUstep
checking for Network Libraries directory... /usr/local/lib
checking for Network Headers directory... /usr/local/include
checking for Network Documentation directory... /usr/local/share/doc/GNUstep
checking for Network Info Documentation directory... /usr/local/info
checking for Network Man Documentation directory... /usr/local/man
checking for Local Applications directory... /usr/local/libexec/GNUstep
checking for Local Admin Applications directory... /usr/local/libexec/GNUstep
checking for Local Web Applications directory... /usr/local/libexec/GNUstep
checking for Local Tools directory... /usr/local/bin
checking for Local Admin Tools directory... /usr/local/sbin
checking for Local Library directory... /usr/local/lib/GNUstep
checking for Local Libraries directory... /usr/local/lib
checking for Local Headers directory... /usr/local/include
checking for Local Documentation directory... /usr/local/share/doc/GNUstep
checking for Local Info Documentation directory... /usr/local/info
checking for Local Man Documentation directory... /usr/local/man
checking for User Applications directory... GNUstep/Applications
checking for User Admin Applications directory... GNUstep/Applications/Admin
checking for User Web Applications directory... GNUstep/WebApplications
checking for User Tools directory... GNUstep/Tools
checking for User Admin Tools directory... GNUstep/Tools/Admin
checking for User Library directory... GNUstep/Library
checking for User Libraries directory... GNUstep/Library/Libraries
checking for User Headers directory... GNUstep/Library/Headers
checking for User Documentation directory... GNUstep/Library/Documentation
checking for User Info Documentation directory... GNUstep/Library/Documentation/info
checking for User Man Documentation directory... GNUstep/Library/Documentation/man
checking for System User directory... /home
checking for Network User directory... /home
checking for Local User directory... /home
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... (cached) o
checking whether the compiler supports GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for cc option to enable C11 features... none needed
checking how to run the C preprocessor... clang -E
checking for stdio.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for wchar.h... (cached) yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking whether the compiler is clang... yes
checking for _LARGEFILE_SOURCE value needed for large files... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for off_t... (cached) yes
checking whether the compiler supports atomic operations... yes
checking for whoami... /usr/bin/whoami
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking the Objective-C runtime... Next Gen
checking for custom shared objc library... NONE
checking for objc/runtime.h... yes
checking for objc/objc.h... yes
configure: for gdomap network details
checking for variable length socket addresses... found
checking for compiler visibility attribute support... found
checking whether SO_REUSEADDR is broken... no
checking for objc threading flags...   
checking whether byte ordering is bigendian... no
checking size of void*... 4
checking size of short... (cached) 2
checking size of int... 4
checking size of long... 4
checking size of long long... (cached) 8
checking size of float... 4
checking size of double... 8
checking for working INTPTR_MAX, INTPTR_MIN, UINTPTR_MAX... yes
checking alignment of objc_object... 4
checking loading of constructor functions... yes
checking for windows.h... no
checking for dlfcn.h... (cached) yes
checking for dynamic linker type... simple
checking for dladdr in -ldl... no
checking for dladdr... yes
checking for gethostbyname... (cached) yes
checking for getaddrinfo... (cached) yes
checking for pthread.h... (cached) yes
checking for pthread_np.h... yes
checking size of pthread_mutex_t... 4
checking for pthread_mutex_t.__data.__owner... no
checking size of pthread_cond_t... 4
checking alignment of pthread_mutex_t... 4
checking alignment of pthread_cond_t... 4
checking for pthread_join in -lpthread... yes
checking for pthread_getthreadid_np... no
checking for pthread_main_np... yes
checking for sched_yield in -lrt... no
checking for pthread_setname_np()... none
checking for pthread_getname_np()... 
checking for pthread_spin_lock... yes
checking for nanosleep... (cached) yes
checking for usleep... (cached) yes
checking for Sleep... no
checking for objc_root_class attribute support... found
checking for gettid()... no
checking whether objc really works... no
I don't seem to be able to use your Objective-C compiler to produce
working binaries!  Please check your Objective-C compiler installation.
If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
can be found by the dynamic linker - usually that requires you to play
with LD_LIBRARY_PATH or /etc/ld.so.conf.
Please refer to your compiler installation instructions for more help.
configure: error: The Objective-C compiler does not work or is not installed properly.
*** Error 1 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3024 'do-configure': @for d in /usr/obj/ports/gnustep-base-1.31.1/...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3044 '/usr/obj/ports/gnustep-base-1.31.1/.configure_done': @cd /us...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:2706 'configure': @lock=gnustep-base-1.31.1p1;  export _LOCKS_HELD...)
===> Exiting x11/gnustep/base with an error
*** Error 1 in /usr/ports (infrastructure/mk/bsd.port.subdir.mk:144 'configure': @: ${echo_msg:=echo};  : ${target:=configure};  for i in ; ...)
>>> Running clean in x11/gnustep/base at 1775701545.40
===> x11/gnustep/base
===>  Cleaning for gnustep-base-1.31.1p1
>>> Ended at 1775701546.25
max_stuck=21.76/depends=34.80/show-prepare-results=10.15/patch=25.27/configure=48.69/clean=0.96
Error: job failed with 512 on armv7-2 at 1775701546
>>> Building on armv7-2 under x11/gnustep/base
	BDEPENDS = [net/avahi,-libs;converters/libiconv;security/gnutls;net/curl;devel/gmake;x11/gnustep/libobjc2;devel/libffi;devel/gmp;textproc/icu4c;textproc/libxslt;x11/gnustep/make]
	DIST = [x11/gnustep/base:gnustep/gnustep-base-1.31.1.tar.gz]
	FULLPKGNAME = gnustep-base-1.31.1p1
	RDEPENDS = [devel/libffi;devel/gmp;textproc/icu4c;x11/gnustep/make;textproc/libxslt;security/gnutls;net/curl;x11/gnustep/libobjc2;net/avahi,-libs;converters/libiconv]
(Junk lock obtained for armv7-2 at 1776048524.29)
>>> Running depends in x11/gnustep/base at 1776048524.44
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
was: /usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
>>> Running show-prepare-results in x11/gnustep/base at 1776048560.09
===> x11/gnustep/base
===> Building from scratch gnustep-base-1.31.1p1
===> gnustep-base-1.31.1p1 depends on: gnustep-make-* -> gnustep-make-2.9.3p0
===> gnustep-base-1.31.1p1 depends on: gmake-* -> gmake-4.4.1p0
===> gnustep-base-1.31.1p1 depends on: libiconv-* -> libiconv-1.17
===> gnustep-base-1.31.1p1 depends on: libffi-* -> libffi-3.5.2
===> gnustep-base-1.31.1p1 depends on: gmp-* -> gmp-6.3.0p0
===> gnustep-base-1.31.1p1 depends on: libxslt-* -> libxslt-1.1.45
===> gnustep-base-1.31.1p1 depends on: gnutls-* -> gnutls-3.8.12p0
===> gnustep-base-1.31.1p1 depends on: icu4c-* -> icu4c-78.3v0
===> gnustep-base-1.31.1p1 depends on: avahi-libs-* -> avahi-libs-0.9rc3
===> gnustep-base-1.31.1p1 depends on: curl-* -> curl-8.19.0
===> gnustep-base-1.31.1p1 depends on: gnustep-libobjc2-* -> gnustep-libobjc2-2.3p0
===>  Verifying specs:  avahi-client avahi-common c ffi gmp gnutls iberty iconv icudata curl icui18n icuuc m objc2 pthread xml2 xslt z zstd c++ c++abi pthread BlocksRuntime dispatch iberty 
===>  found avahi-client.0.3 avahi-common.0.3 c.103.0 ffi.2.4 gmp.11.1 gnutls.47.13 iberty.13.0 iconv.7.1 icudata.23.0 curl.26.34 icui18n.23.0 icuuc.23.0 m.10.1 objc2.4.0 pthread.28.1 xml2.22.1 xslt.4.2 z.7.2 zstd.7.0 c++.12.0 c++abi.9.0 BlocksRuntime.0.0 dispatch.0.0
avahi-libs-0.9rc3
curl-8.19.0
gmake-4.4.1p0
gmp-6.3.0p0
gnustep-libobjc2-2.3p0
gnustep-make-2.9.3p0
gnutls-3.8.12p0
icu4c-78.3v0
libffi-3.5.2
libiconv-1.17
libxslt-1.1.45
(Junk lock released for armv7-2 at 1776048570.25)
distfiles size=3831129
>>> Running patch in x11/gnustep/base at 1776048570.35
===> x11/gnustep/base
===>  Checking files for gnustep-base-1.31.1p1
`/usr/ports/distfiles/gnustep/gnustep-base-1.31.1.tar.gz' is up to date.
>> (SHA256) all files: OK
===>  Extracting for gnustep-base-1.31.1p1
===>  Patching for gnustep-base-1.31.1p1
===>   Applying OpenBSD patch patch-Tools_Makefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- Tools/Makefile.postamble.orig	Thu Jun  9 19:14:46 2011
|+++ Tools/Makefile.postamble	Thu Jul  7 19:32:01 2011
--------------------------
Patching file Tools/Makefile.postamble using Plan A...
Hunk #1 succeeded at 50.
Hunk #2 succeeded at 57.
done
===>   Applying OpenBSD patch patch-Tools_make_strings_GNUmakefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Do not install gzipped manual page
|
|--- Tools/make_strings/GNUmakefile.postamble.orig	Mon Mar 16 12:44:23 2015
|+++ Tools/make_strings/GNUmakefile.postamble	Mon Mar 16 12:44:31 2015
--------------------------
Patching file Tools/make_strings/GNUmakefile.postamble using Plan A...
Hunk #1 succeeded at 44.
done
===>  Compiler link: clang -> /usr/bin/clang
===>  Compiler link: clang++ -> /usr/bin/clang++
===>  Compiler link: cc -> /usr/bin/cc
===>  Compiler link: c++ -> /usr/bin/c++
>>> Running configure in x11/gnustep/base at 1776048596.46
===> x11/gnustep/base
===>  Generating configure for gnustep-base-1.31.1p1
===>  Configuring for gnustep-base-1.31.1p1
Using /usr/obj/ports/gnustep-base-1.31.1/config.site (generated)
configure: WARNING: unrecognized options: --disable-debug, --enable-strip, --disable-silent-rules, --disable-gtk-doc
configure: loading site script /usr/obj/ports/gnustep-base-1.31.1/config.site
checking build system type... arm-unknown-openbsd7.9
checking host system type... arm-unknown-openbsd7.9
checking target system type... arm-unknown-openbsd7.9
checking for GNUstep configuration file to use at runtime... /etc/GNUstep.conf
checking whether the GNUstep.conf file path can be set in the environment... yes
checking if we should import an existing configuration file now... yes
checking for default GNUstep configuration file to use... /etc/GNUstep.conf
trying to import "/etc/GNUstep.conf"
configure: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option
checking for GNUstep-base installation domain... LOCAL
checking if we are hardcoding any relative paths in gnustep-base... no
configure: We store the following filesystem layout into gnustep-base, to be used when no config file is found
checking for Makefiles directory... /usr/local/share/GNUstep/Makefiles
checking for user defaults directory... GNUstep/Defaults
checking for user config file... .GNUstep.conf
checking for System Applications directory... /usr/local/libexec/GNUstep
checking for System Admin Applications directory... /usr/local/libexec/GNUstep
checking for System Web Applications directory... /usr/local/libexec/GNUstep
checking for System Tools directory... /usr/local/bin
checking for System Admin Tools directory... /usr/local/sbin
checking for System Library directory... /usr/local/lib/GNUstep
checking for System Libraries directory... /usr/local/lib
checking for System Headers directory... /usr/local/include
checking for System Documentation directory... /usr/local/share/doc/GNUstep
checking for System Info Documentation directory... /usr/local/info
checking for System Man Documentation directory... /usr/local/man
checking for Network Applications directory... /usr/local/libexec/GNUstep
checking for Network Admin Applications directory... /usr/local/libexec/GNUstep
checking for Network Web Applications directory... /usr/local/libexec/GNUstep
checking for Network Tools directory... /usr/local/bin
checking for Network Admin Tools directory... /usr/local/sbin
checking for Network Library directory... /usr/local/lib/GNUstep
checking for Network Libraries directory... /usr/local/lib
checking for Network Headers directory... /usr/local/include
checking for Network Documentation directory... /usr/local/share/doc/GNUstep
checking for Network Info Documentation directory... /usr/local/info
checking for Network Man Documentation directory... /usr/local/man
checking for Local Applications directory... /usr/local/libexec/GNUstep
checking for Local Admin Applications directory... /usr/local/libexec/GNUstep
checking for Local Web Applications directory... /usr/local/libexec/GNUstep
checking for Local Tools directory... /usr/local/bin
checking for Local Admin Tools directory... /usr/local/sbin
checking for Local Library directory... /usr/local/lib/GNUstep
checking for Local Libraries directory... /usr/local/lib
checking for Local Headers directory... /usr/local/include
checking for Local Documentation directory... /usr/local/share/doc/GNUstep
checking for Local Info Documentation directory... /usr/local/info
checking for Local Man Documentation directory... /usr/local/man
checking for User Applications directory... GNUstep/Applications
checking for User Admin Applications directory... GNUstep/Applications/Admin
checking for User Web Applications directory... GNUstep/WebApplications
checking for User Tools directory... GNUstep/Tools
checking for User Admin Tools directory... GNUstep/Tools/Admin
checking for User Library directory... GNUstep/Library
checking for User Libraries directory... GNUstep/Library/Libraries
checking for User Headers directory... GNUstep/Library/Headers
checking for User Documentation directory... GNUstep/Library/Documentation
checking for User Info Documentation directory... GNUstep/Library/Documentation/info
checking for User Man Documentation directory... GNUstep/Library/Documentation/man
checking for System User directory... /home
checking for Network User directory... /home
checking for Local User directory... /home
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... (cached) o
checking whether the compiler supports GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for cc option to enable C11 features... none needed
checking how to run the C preprocessor... clang -E
checking for stdio.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for wchar.h... (cached) yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking whether the compiler is clang... yes
checking for _LARGEFILE_SOURCE value needed for large files... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for off_t... (cached) yes
checking whether the compiler supports atomic operations... yes
checking for whoami... /usr/bin/whoami
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking the Objective-C runtime... Next Gen
checking for custom shared objc library... NONE
checking for objc/runtime.h... yes
checking for objc/objc.h... yes
configure: for gdomap network details
checking for variable length socket addresses... found
checking for compiler visibility attribute support... found
checking whether SO_REUSEADDR is broken... no
checking for objc threading flags...   
checking whether byte ordering is bigendian... no
checking size of void*... 4
checking size of short... (cached) 2
checking size of int... 4
checking size of long... 4
checking size of long long... (cached) 8
checking size of float... 4
checking size of double... 8
checking for working INTPTR_MAX, INTPTR_MIN, UINTPTR_MAX... yes
checking alignment of objc_object... 4
checking loading of constructor functions... yes
checking for windows.h... no
checking for dlfcn.h... (cached) yes
checking for dynamic linker type... simple
checking for dladdr in -ldl... no
checking for dladdr... yes
checking for gethostbyname... (cached) yes
checking for getaddrinfo... (cached) yes
checking for pthread.h... (cached) yes
checking for pthread_np.h... yes
checking size of pthread_mutex_t... 4
checking for pthread_mutex_t.__data.__owner... no
checking size of pthread_cond_t... 4
checking alignment of pthread_mutex_t... 4
checking alignment of pthread_cond_t... 4
checking for pthread_join in -lpthread... yes
checking for pthread_getthreadid_np... no
checking for pthread_main_np... yes
checking for sched_yield in -lrt... no
checking for pthread_setname_np()... none
checking for pthread_getname_np()... 
checking for pthread_spin_lock... yes
checking for nanosleep... (cached) yes
checking for usleep... (cached) yes
checking for Sleep... no
checking for objc_root_class attribute support... found
checking for gettid()... no
checking whether objc really works... no
I don't seem to be able to use your Objective-C compiler to produce
working binaries!  Please check your Objective-C compiler installation.
If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
can be found by the dynamic linker - usually that requires you to play
with LD_LIBRARY_PATH or /etc/ld.so.conf.
Please refer to your compiler installation instructions for more help.
configure: error: The Objective-C compiler does not work or is not installed properly.
*** Error 1 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3024 'do-configure': @for d in /usr/obj/ports/gnustep-base-1.31.1/...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3044 '/usr/obj/ports/gnustep-base-1.31.1/.configure_done': @cd /us...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:2706 'configure': @lock=gnustep-base-1.31.1p1;  export _LOCKS_HELD...)
===> Exiting x11/gnustep/base with an error
*** Error 1 in /usr/ports (infrastructure/mk/bsd.port.subdir.mk:144 'configure': @: ${echo_msg:=echo};  : ${target:=configure};  for i in ; ...)
>>> Running clean in x11/gnustep/base at 1776048645.37
===> x11/gnustep/base
===>  Cleaning for gnustep-base-1.31.1p1
>>> Ended at 1776048646.27
max_stuck=32.95/depends=35.71/show-prepare-results=10.25/patch=26.06/configure=48.96/clean=0.99
Error: job failed with 512 on armv7-2 at 1776048646
>>> Building on armv7-2 under x11/gnustep/base
	BDEPENDS = [textproc/icu4c;net/curl;converters/libiconv;x11/gnustep/libobjc2;net/avahi,-libs;x11/gnustep/make;devel/gmp;devel/gmake;devel/libffi;security/gnutls;textproc/libxslt]
	DIST = [x11/gnustep/base:gnustep/gnustep-base-1.31.1.tar.gz]
	FULLPKGNAME = gnustep-base-1.31.1p1
	RDEPENDS = [textproc/icu4c;devel/libffi;net/curl;converters/libiconv;security/gnutls;x11/gnustep/libobjc2;textproc/libxslt;net/avahi,-libs;x11/gnustep/make;devel/gmp]
(Junk lock obtained for armv7-2 at 1776729184.36)
>>> Running depends in x11/gnustep/base at 1776729184.47
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
was: /usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
/usr/sbin/pkg_add -aI -Drepair avahi-libs-0.9rc3 curl-8.19.0 gmake-4.4.1p0 gmp-6.3.0p0 gnustep-libobjc2-2.3p0 gnustep-make-2.9.3p0 gnutls-3.8.12p0 icu4c-78.3v0 libffi-3.5.2 libiconv-1.17 libxslt-1.1.45
>>> Running show-prepare-results in x11/gnustep/base at 1776729208.32
===> x11/gnustep/base
===> Building from scratch gnustep-base-1.31.1p1
===> gnustep-base-1.31.1p1 depends on: gnustep-make-* -> gnustep-make-2.9.3p0
===> gnustep-base-1.31.1p1 depends on: gmake-* -> gmake-4.4.1p0
===> gnustep-base-1.31.1p1 depends on: libiconv-* -> libiconv-1.17
===> gnustep-base-1.31.1p1 depends on: libffi-* -> libffi-3.5.2
===> gnustep-base-1.31.1p1 depends on: gmp-* -> gmp-6.3.0p0
===> gnustep-base-1.31.1p1 depends on: libxslt-* -> libxslt-1.1.45
===> gnustep-base-1.31.1p1 depends on: gnutls-* -> gnutls-3.8.12p0
===> gnustep-base-1.31.1p1 depends on: icu4c-* -> icu4c-78.3v0
===> gnustep-base-1.31.1p1 depends on: avahi-libs-* -> avahi-libs-0.9rc3
===> gnustep-base-1.31.1p1 depends on: curl-* -> curl-8.19.0
===> gnustep-base-1.31.1p1 depends on: gnustep-libobjc2-* -> gnustep-libobjc2-2.3p0
===>  Verifying specs:  avahi-client avahi-common c ffi gmp gnutls iberty iconv icudata curl icui18n icuuc m objc2 pthread xml2 xslt z zstd c++ c++abi pthread BlocksRuntime dispatch iberty 
===>  found avahi-client.0.3 avahi-common.0.3 c.103.0 ffi.2.4 gmp.11.1 gnutls.47.13 iberty.13.0 iconv.7.1 icudata.23.0 curl.26.34 icui18n.23.0 icuuc.23.0 m.10.1 objc2.4.0 pthread.28.1 xml2.22.1 xslt.4.2 z.7.2 zstd.7.0 c++.12.0 c++abi.9.0 BlocksRuntime.0.0 dispatch.0.0
avahi-libs-0.9rc3
curl-8.19.0
gmake-4.4.1p0
gmp-6.3.0p0
gnustep-libobjc2-2.3p0
gnustep-make-2.9.3p0
gnutls-3.8.12p0
icu4c-78.3v0
libffi-3.5.2
libiconv-1.17
libxslt-1.1.45
(Junk lock released for armv7-2 at 1776729218.64)
distfiles size=3831129
>>> Running patch in x11/gnustep/base at 1776729218.73
===> x11/gnustep/base
===>  Checking files for gnustep-base-1.31.1p1
`/usr/ports/distfiles/gnustep/gnustep-base-1.31.1.tar.gz' is up to date.
>> (SHA256) all files: OK
===>  Extracting for gnustep-base-1.31.1p1
===>  Patching for gnustep-base-1.31.1p1
===>   Applying OpenBSD patch patch-Tools_Makefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|--- Tools/Makefile.postamble.orig	Thu Jun  9 19:14:46 2011
|+++ Tools/Makefile.postamble	Thu Jul  7 19:32:01 2011
--------------------------
Patching file Tools/Makefile.postamble using Plan A...
Hunk #1 succeeded at 50.
Hunk #2 succeeded at 57.
done
===>   Applying OpenBSD patch patch-Tools_make_strings_GNUmakefile_postamble
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|Do not install gzipped manual page
|
|--- Tools/make_strings/GNUmakefile.postamble.orig	Mon Mar 16 12:44:23 2015
|+++ Tools/make_strings/GNUmakefile.postamble	Mon Mar 16 12:44:31 2015
--------------------------
Patching file Tools/make_strings/GNUmakefile.postamble using Plan A...
Hunk #1 succeeded at 44.
done
===>  Compiler link: clang -> /usr/bin/clang
===>  Compiler link: clang++ -> /usr/bin/clang++
===>  Compiler link: cc -> /usr/bin/cc
===>  Compiler link: c++ -> /usr/bin/c++
>>> Running configure in x11/gnustep/base at 1776729246.89
===> x11/gnustep/base
===>  Generating configure for gnustep-base-1.31.1p1
===>  Configuring for gnustep-base-1.31.1p1
Using /usr/obj/ports/gnustep-base-1.31.1/config.site (generated)
configure: WARNING: unrecognized options: --disable-debug, --enable-strip, --disable-silent-rules, --disable-gtk-doc
configure: loading site script /usr/obj/ports/gnustep-base-1.31.1/config.site
checking build system type... arm-unknown-openbsd7.9
checking host system type... arm-unknown-openbsd7.9
checking target system type... arm-unknown-openbsd7.9
checking for GNUstep configuration file to use at runtime... /etc/GNUstep.conf
checking whether the GNUstep.conf file path can be set in the environment... yes
checking if we should import an existing configuration file now... yes
checking for default GNUstep configuration file to use... /etc/GNUstep.conf
trying to import "/etc/GNUstep.conf"
configure: If this fails, please run configure again with the --disable-importing-config-file option or specifying an alternative file using the --with-default-config= option
checking for GNUstep-base installation domain... LOCAL
checking if we are hardcoding any relative paths in gnustep-base... no
configure: We store the following filesystem layout into gnustep-base, to be used when no config file is found
checking for Makefiles directory... /usr/local/share/GNUstep/Makefiles
checking for user defaults directory... GNUstep/Defaults
checking for user config file... .GNUstep.conf
checking for System Applications directory... /usr/local/libexec/GNUstep
checking for System Admin Applications directory... /usr/local/libexec/GNUstep
checking for System Web Applications directory... /usr/local/libexec/GNUstep
checking for System Tools directory... /usr/local/bin
checking for System Admin Tools directory... /usr/local/sbin
checking for System Library directory... /usr/local/lib/GNUstep
checking for System Libraries directory... /usr/local/lib
checking for System Headers directory... /usr/local/include
checking for System Documentation directory... /usr/local/share/doc/GNUstep
checking for System Info Documentation directory... /usr/local/info
checking for System Man Documentation directory... /usr/local/man
checking for Network Applications directory... /usr/local/libexec/GNUstep
checking for Network Admin Applications directory... /usr/local/libexec/GNUstep
checking for Network Web Applications directory... /usr/local/libexec/GNUstep
checking for Network Tools directory... /usr/local/bin
checking for Network Admin Tools directory... /usr/local/sbin
checking for Network Library directory... /usr/local/lib/GNUstep
checking for Network Libraries directory... /usr/local/lib
checking for Network Headers directory... /usr/local/include
checking for Network Documentation directory... /usr/local/share/doc/GNUstep
checking for Network Info Documentation directory... /usr/local/info
checking for Network Man Documentation directory... /usr/local/man
checking for Local Applications directory... /usr/local/libexec/GNUstep
checking for Local Admin Applications directory... /usr/local/libexec/GNUstep
checking for Local Web Applications directory... /usr/local/libexec/GNUstep
checking for Local Tools directory... /usr/local/bin
checking for Local Admin Tools directory... /usr/local/sbin
checking for Local Library directory... /usr/local/lib/GNUstep
checking for Local Libraries directory... /usr/local/lib
checking for Local Headers directory... /usr/local/include
checking for Local Documentation directory... /usr/local/share/doc/GNUstep
checking for Local Info Documentation directory... /usr/local/info
checking for Local Man Documentation directory... /usr/local/man
checking for User Applications directory... GNUstep/Applications
checking for User Admin Applications directory... GNUstep/Applications/Admin
checking for User Web Applications directory... GNUstep/WebApplications
checking for User Tools directory... GNUstep/Tools
checking for User Admin Tools directory... GNUstep/Tools/Admin
checking for User Library directory... GNUstep/Library
checking for User Libraries directory... GNUstep/Library/Libraries
checking for User Headers directory... GNUstep/Library/Headers
checking for User Documentation directory... GNUstep/Library/Documentation
checking for User Info Documentation directory... GNUstep/Library/Documentation/info
checking for User Man Documentation directory... GNUstep/Library/Documentation/man
checking for System User directory... /home
checking for Network User directory... /home
checking for Local User directory... /home
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... (cached) o
checking whether the compiler supports GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for cc option to enable C11 features... none needed
checking how to run the C preprocessor... clang -E
checking for stdio.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for sys/types.h... (cached) yes
checking for unistd.h... (cached) yes
checking for wchar.h... (cached) yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking whether the compiler is clang... yes
checking for _LARGEFILE_SOURCE value needed for large files... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for off_t... (cached) yes
checking whether the compiler supports atomic operations... yes
checking for whoami... /usr/bin/whoami
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking the Objective-C runtime... Next Gen
checking for custom shared objc library... NONE
checking for objc/runtime.h... yes
checking for objc/objc.h... yes
configure: for gdomap network details
checking for variable length socket addresses... found
checking for compiler visibility attribute support... found
checking whether SO_REUSEADDR is broken... no
checking for objc threading flags...   
checking whether byte ordering is bigendian... no
checking size of void*... 4
checking size of short... (cached) 2
checking size of int... 4
checking size of long... 4
checking size of long long... (cached) 8
checking size of float... 4
checking size of double... 8
checking for working INTPTR_MAX, INTPTR_MIN, UINTPTR_MAX... yes
checking alignment of objc_object... 4
checking loading of constructor functions... yes
checking for windows.h... no
checking for dlfcn.h... (cached) yes
checking for dynamic linker type... simple
checking for dladdr in -ldl... no
checking for dladdr... yes
checking for gethostbyname... (cached) yes
checking for getaddrinfo... (cached) yes
checking for pthread.h... (cached) yes
checking for pthread_np.h... yes
checking size of pthread_mutex_t... 4
checking for pthread_mutex_t.__data.__owner... no
checking size of pthread_cond_t... 4
checking alignment of pthread_mutex_t... 4
checking alignment of pthread_cond_t... 4
checking for pthread_join in -lpthread... yes
checking for pthread_getthreadid_np... no
checking for pthread_main_np... yes
checking for sched_yield in -lrt... no
checking for pthread_setname_np()... none
checking for pthread_getname_np()... 
checking for pthread_spin_lock... yes
checking for nanosleep... (cached) yes
checking for usleep... (cached) yes
checking for Sleep... no
checking for objc_root_class attribute support... found
checking for gettid()... no
checking whether objc really works... no
I don't seem to be able to use your Objective-C compiler to produce
working binaries!  Please check your Objective-C compiler installation.
If you are using gcc-3.x make sure that your compiler's libgcc_s and libobjc
can be found by the dynamic linker - usually that requires you to play
with LD_LIBRARY_PATH or /etc/ld.so.conf.
Please refer to your compiler installation instructions for more help.
configure: error: The Objective-C compiler does not work or is not installed properly.
*** Error 1 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3024 'do-configure': @for d in /usr/obj/ports/gnustep-base-1.31.1/...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:3044 '/usr/obj/ports/gnustep-base-1.31.1/.configure_done': @cd /us...)
*** Error 2 in x11/gnustep/base (/usr/ports/infrastructure/mk/bsd.port.mk:2706 'configure': @lock=gnustep-base-1.31.1p1;  export _LOCKS_HELD...)
===> Exiting x11/gnustep/base with an error
*** Error 1 in /usr/ports (infrastructure/mk/bsd.port.subdir.mk:144 'configure': @: ${echo_msg:=echo};  : ${target:=configure};  for i in ; ...)
>>> Running clean in x11/gnustep/base at 1776729297.64
===> x11/gnustep/base
===>  Cleaning for gnustep-base-1.31.1p1
>>> Ended at 1776729298.54
max_stuck=23.66/depends=23.86/show-prepare-results=10.42/patch=28.14/configure=50.76/clean=0.98
Error: job failed with 512 on armv7-2 at 1776729298